How to Turn a Flatbed Scanner into a Handheld Camera for Spooky Photos!
Extra photos for bloggers: 1, 2, 3
Pumpkins, witches and Wes Craven.
That time of year has come again when the ghouls and ghosts come out to play, but why should they have all the fun?
With the help of the homemade scanner camera, you can set up your own warped and wonderful photo booth.
Celebrate all things spooky by taking eerie and distorted images complete with long exposures, glitches and vignetting! It’ll turn you and your pals into unearthly creatures and make your party the talk of the town.
Give yourself two heads, wiggle your fingers or simply smile. Just hit scan, say cheese and let the freak show commence.
p.s. Rad! There’s an iPhone photography conference called 1197 on Oct. 22nd in SF. We’ll be there demoing some goodies!
Why It’s Cool
Wouldn’t it be fantastic to build a homemade camera that yields instant results? It’s like having a DIY photo booth in your bedroom!
What You’ll Need
- A flatbed scanner; removable lid preferred but not essential
- Black foam board; 5 8″x6″ sheets
- Scissors or X-acto knife
- Magnifying glass
- Duct tape
Step 1: Measure Up
If your scanner lid does not come off, then just lift it as far as it will go and work around it.
Step 2: CUTTING THE BASE BOARD
We’re going to call this the base board (’cause that’s what it is!).
Step 3: CUT A SQUARE
Cut a 7”x7” square in the middle of the base board.
You don’t have to be too precise on where the middle is, so eyeballing it is just fine.
Step 4: MAKING THE BOX
We’ve used silver duct tape, but you can use black to help keep the light in and make things a bit neater looking.
Step 5: TAPE IT DOWN
Remember: There’s no such thing as too much duct tape!
Step 6: MAKING THE LENS BOX (DE JA VU)
The second box will control your focal length (you’ll be able to pull it in and out kind of like a zoom lens). It needs to be a little bigger than your first box in order for it to fit snugly around the outside of it.
Once you’ve taped the second box together, place it over the first box so that it sounds around the outside of it.
Step 7: MAKING THE LID
Remove the handle from your magnifying glass. Place the magnifying glass lens on the middle of the lid you’ve just cut from foam board and draw around the circumference.
Cut out a hole along what you’ve drawn, and pop your magnifying glass into the hole. Secure it onto the lid with tape on both the inside and outside.
Once everything is in place, tape the lid onto the lens box. Almost there!
Step 8: SECURE AND READY TO GO
Just tape your lovely foam board body over the scanner bed so it’s nice and secure and point your scanner at something nice. FYI, you can use a less sticky tape like artist’s tape if you’re worried about getting goop on your scanner.
Step 9: TAKING THE PICTURE
We recommend taking some self portraits (hold still!) to test the water and then go crazy.
Tips & More Ideas
- Move the lens box in and out to find the perfect focus. Or make it go out of focus!
- Shake the lens box a little in the middle of the scan. The combination of movement and change in focus will create some pretty weird effects like wavy images and awesome glitches!
- Try making some aperture cards by cutting different sized holes in black card and holding them over the magnifying lens to control the amount of light hitting the scanner.
- Got an old SLR lens handy? Attach the lens in place of the magnifying glass and grant yourself control of the aperture!
- Does your scanner come attached to a printer? Try pressing the photocopy button for a new twist on the classic ‘photocopying body parts’ prank.
- Play around with the depth of field by photographing objects at various distances from the lens.